Window cleaning in Aberdeen and Aberdeenshire
Clean windows change how a property feels, but the visible glass is only one part of a safe and useful job. Frames, sills, seals, height, access below and the condition of the pane all affect the method. Nova Clean Aberdeen discusses window cleaning for homes, managed buildings, offices and shopfronts in Aberdeen and Aberdeenshire. We define which faces can be reached, whether frames are included and what precautions are needed around occupants, pedestrians and fragile finishes.
A ground-floor shopfront on a busy pavement differs from upper-floor glazing above a conservatory or a narrow tenement courtyard. We ask for photographs from safe positions, the number of windows, approximate height and any restrictions imposed by the building manager. A quotation should distinguish internal and external glass, high-level work, skylights, signage and any specialist stain treatment. We do not assume that every pane in a building can be reached with one piece of equipment.
Choose the method from the building, not the other way round
Traditional hand tools may be suitable where the glass can be reached safely. A water-fed pole can reduce some access needs at height, but its working range, ground conditions and proximity to electrical hazards must be assessed. A platform or other access system may be needed for complex elevations. A ladder is not automatically appropriate simply because a window is above head height. We also ask about fragile roofs, light wells, projections and public routes beneath the work area.
Windows in Aberdeen can combine modern sealed units, sash frames, leaded panes, coated glass and older putty. The pane may tolerate a cleaning method that a deteriorated frame or seal does not. We inspect visible defects and avoid directing forceful water into joints. A cracked pane, failed seal or rotten frame is a repair issue; cleaning may reveal it but cannot fix it. If the building is managed or has conservation considerations, the owner should provide relevant instructions before work begins.
Salt, traffic film and ordinary deposits
Coastal exposure can leave a film on glass, while traffic and construction activity add grit and fine dust. Dried bird deposits, paint flecks and adhesive residue need individual assessment. Scraping an unknown coating can cause a permanent scratch, and rubbing grit across the pane may damage it. A small test area may be sensible for a stubborn mark. We can remove compatible surface deposits without promising that scratches, etching or misting inside a sealed unit will disappear.
Water quality affects spotting, especially when large panes dry quickly. The chosen process should suit the glass and the surrounding frame. On a shopfront, nearby signage, displays and electrical fittings may need protection. On a home, planting, furniture and an open window below can affect how water is used. We agree whether internal sills and frames are included rather than treating them as an unstated extra.
Shopfronts and customer-facing windows
A retail window must often be cleaned before opening or during a quiet interval. Hoses, equipment and wet pavement can interfere with pedestrians if the work zone is not planned. We ask about access, trading hours and whether stock or display props are close to the inside glass. Internal cleaning may require the retailer to clear fragile items first. External signage, shutters and awnings should be identified separately from the glazing.
For a full shop handover, window cleaning can be coordinated with shop and retail deep cleaning. The work may be more efficient once trades or stock movements are finished, so freshly cleaned panes are not immediately marked. High-level signage or a large glazed canopy can require separate access. A clear list of panes and faces prevents confusion at handover.
Homes, flats and managed properties
Inside a home, window cleaning requires enough clear space to work without moving personal belongings unexpectedly. Tell us about blinds, curtains, fragile furniture and pets. An upper-floor flat may have tilt-in windows, restricted opening or panes inaccessible from inside. Shared stair glazing may belong to the factor rather than the flat owner. We establish who can authorise cleaning of common parts and whether residents need notice.
For an end of tenancy clean, specify whether internal glazing, frames and sills are included and whether exterior panes require a separate visit. Our end of tenancy cleaning service covers detailed room handovers, but its scope should not be assumed to include high exterior windows. The inventory and the starting condition are useful references for worn seals or permanent marks.
Commercial glazing and safe working hours
Offices and managed buildings may have access procedures, public entrances and multiple elevations. A high atrium or roof light cannot be priced from an exterior photograph alone. We ask for a floor plan, glazing schedule if available, site contact and whether a platform can be accommodated. Work near lifts, emergency exits or electrical installations needs coordination with facilities staff. The team should know which areas must remain available during business hours.
Weather matters on an exposed north-east elevation. Wind can carry water outside the planned zone, rain can obscure the result and freezing conditions can make access unsafe. A date may need to change for safety or quality. We explain how the method and schedule relate to the actual building rather than promise a fixed duration for every pane.
Older sash windows and delicate frames need a slower inspection
Aberdeen has many older tenements, granite terraces and converted properties where a window is more than a sheet of glass. Timber sash frames may have aged paint, brittle putty, narrow glazing bars and cords that should not be pulled or soaked. Before work, we look for loose sections, flaking coatings, cracked panes and water already collecting at the bottom rail. A cleaner can remove accessible dirt, but cannot repair rotten timber or make failed seals watertight. These observations should be recorded so that a property owner can arrange the right trade where needed.
On a modern frame, the same care is needed for different reasons. Powder-coated aluminium, uPVC, composite sections and decorative films may react differently to a product or an abrasive pad. We begin with a compatible low-impact method and test an inconspicuous area where the finish is uncertain. The working order matters: remove loose grit, clean frames and edges without dragging particles across the pane, then wash and finish the glass. This reduces the risk of scratching caused by salt and mineral grains trapped in a cloth.
When glass carries adhesive, paint or construction residue
After a refit, a shopfront or newly installed window may show labels, silicone smears, plaster dust and paint flecks. Some residues can be softened and removed with a suitable technique; others may be bonded to a coating, scratched into the glass or left beneath a protective film. We ask when the installation was completed and whether the supplier has given cleaning instructions. A scraper is not an automatic solution, especially on coated, toughened or treated glass where the manufacturer warns against contact tools. We identify the material and agree a small trial before making a promise about the finished appearance.
Construction dust should be lifted before wet wiping. If a cloth carries fine grit from the sill to the pane, a clean looking window can acquire permanent marks. Work following renovation is therefore separated into dust control, residue assessment, frame cleaning and glass finishing. If the surrounding room also needs a final handover clean, coordinate the glazing with after builders cleaning so that dust from later trades does not settle onto freshly cleaned panes.
Water, drainage and neighbours in shared buildings
Exterior washing in a block can affect more than the window being cleaned. We check whether water can run over lower flats, an entrance canopy, a balcony or a public footway. In a shared stair or managed building, the factor or managing agent may need notice before access equipment is brought in. A courtyard may be too narrow for a particular platform, while a steep pavement or traffic route may require a different approach. The quotation should distinguish ordinary reachable glazing from panes that need dedicated high-level access.
Internal work also needs a practical sequence. Occupants may have blinds, fragile objects, security sensors and cables beside a window. We ask them to clear a safe working area, or we agree in advance who will move items and where they will be placed. Protecting floors and furniture becomes especially important when a property has fresh timber finishes or delicate stone. Work should leave sills dry enough to avoid moisture sitting against painted joinery.
Cleaning frequency based on use and exposure
A fixed calendar does not suit every Aberdeen address. A shopfront facing a busy road may need attention more often than a sheltered upper-floor flat. Coastal exposure can bring salt film; construction nearby can leave dust; a restaurant frontage may collect fingerprints and grease around door glass. We can discuss a realistic interval after seeing how quickly deposits return. For a commercial property, the plan can separate entrance glazing, interior partitions and less exposed elevations rather than treating every pane as equally urgent.
Regular cleaning can also make inspections easier. A clean pane reveals failed double-glazing seals, damaged edge gaskets, loose beading and persistent hard-water marks that were previously hidden by dirt. Cleaning does not correct these faults, but recording them can help the owner decide whether maintenance is required. Where a pane has permanent etching or scratches, it is more honest to describe the limitation than to repeat aggressive treatment in the hope of making it disappear.
What a clear quotation and handover should record
Two quotes described only as window cleaning may cover very different work. An itemised scope should identify the address, accessible elevations, internal or external faces, number or approximate area of panes, frames and sills, high-level access, unusual deposits and the planned method. It should also explain whether moving objects, traffic control, platform hire or a return visit is included. Photographs can help, but an access assessment may still be necessary where the height or ground conditions are unclear.
At completion, the practical check is whether the agreed glazing was reached and whether visible removable deposits have been treated without damage to adjoining finishes. Inspect in ordinary light where possible, remembering that strong low sun can reveal pre-existing scratches or residue beneath the glass. If an area cannot be safely reached on the agreed day, that should be reported with a proposed next step. For business premises, a named contact can review the result before temporary barriers and equipment are removed.
Plan a repeat visit only where it adds value
A storefront facing a busy street may need the entrance glass treated more frequently than upper panes sheltered from direct spray. We can discuss a practical schedule after seeing how deposits return, separating regular accessible work from occasional high-level access. A repeated visit should have a defined list of panes and faces so that staff know what was treated. Frames, seals and sills can also be checked for visible deterioration, although repairs remain another trade's responsibility.
For a household, timing may be linked to renovation, tenancy handover or seasonal maintenance rather than a fixed calendar. We ask whether interior objects can be moved safely and whether pets or occupants need a clear route. The final inspection should distinguish removable streaks from scratches, failed glazing units or water marks beneath a coating. This makes a future decision about maintenance more useful than simply repeating a strong cleaning process.
Photographs, scope and local coverage
Send an exact postcode, images of each elevation, approximate number of panes, floor levels, access beneath the windows and the marks you want removed. Tell us whether frames, sills, internal glazing, shopfronts or high-level glass are included. We discuss enquiries in Aberdeen city centre, Rosemount, Ferryhill, Torry, Bridge of Don, Dyce, Cove Bay and nearby Westhill, Portlethen, Stonehaven and Inverurie. Availability and the access plan are confirmed for each address.
Call 0845 52 805 20, email